Ultimate Series Microphones
3 participants
Page 1 sur 1
Ultimate Series Microphones
Salut,
Je recherche un micro non typé trop blues genre bullet, mais qui a l'avantage d'avoir un réglage de niveau sonore et qui soit plus pratique a prendre en main qu'un shure 57 que je ne trou pas confortable.
Je fais mes recherches et je tombe là dessus :
http://www.blowsmeaway.com/ultimate.html
Cool pile poil ce que je veux , par contre on me demande ça :
Ordering: I need to know how you want the mic set up:
A) Low impedance with XLR connector (like a stock SM57 or SM58)
B) High Impedance with Screw-on Connector
C) High impedance with XLR connector "Pin 2 Hot"
D) High impedance with XLR connector "Pin 3 Hot"
All options require a cable that matches that particular configuration:
Low impedance configuration requires a standard low impedance XLR<-->XLR cable. Connect this directly to a PA or wireless transmitter, or connect to a high impedance input like a harp/guitar amp by adding an impedance matching transformer. Note this configuration will not work properly with high impedance XLR cables, i.e., cables with an XLR connector at the mic and and a 1/4” plug at the other. See options C and D above.
High impedance mics are supplied with your choice of standard Switchcraft style 5/8" screw-on connector, or XLR connector. High impedance XLR can be wired "Pin 2 Hot" or "Pin 3 Hot" and must match your cable to work. The Pin 2 Hot configuration is compatible with the Samson AX1 wireless transmitter I offer - no impedance matching transformer is required. Neither of these cables is compatible with low impedance microphones.
If you don't have a cable already, I recommend the screw-on connector (and a cable to go with it if you need one.) This is the shortest, lightest and most secure combination.
Any configuration can be connected to anything - choose what's simplest for you. Here's another way to look at it:
To connect to:
Ultimate Mic Configuration Amp or pedal PA's XLR input PA's 1/4" input AX1 Wireless Transmitter
A: Low Z XLR XLR-XLR cable + Impedance Matching Transformer XLR-XLR cable XLR-XLR cable + Impedance Matching Transformer Yes
B: High Z Screw-on Screw-on cable Screw-on cable + DI Box Screw-on cable Yes, screw-on to XLR adapter required
C: High-Z XLR Pin 2 Hot XLR-1/4" cable,
Pin 2 Hot XLR-1/4" cable, Pin 2 Hot + DI Box XLR-1/4" cable, Pin 2 Hot Yes
D: High-Z XLR Pin 3 Hot XLR-1/4" cable,
Pin 3 Hot XLR-1/4" cable, Pin 3 Hot + DI Box XLR-1/4" cable, Pin 3 Hot Yes, Pin 3 Hot to Pin 2 Hot adapter required
If this is confusing feel free to ask more questions. Once you know what configuration you want, let me know and I will send you a PayPal invoice.
Je sais pas ce que c'est tout ça ! que faut t'il prendre ? je veux pouvoir l'utiliser sur un ampli lampe 5W chez moi et l'utiliser sur scène directement branché à une console.
bon je sais pas si je suis clair !
Je recherche un micro non typé trop blues genre bullet, mais qui a l'avantage d'avoir un réglage de niveau sonore et qui soit plus pratique a prendre en main qu'un shure 57 que je ne trou pas confortable.
Je fais mes recherches et je tombe là dessus :
http://www.blowsmeaway.com/ultimate.html
Cool pile poil ce que je veux , par contre on me demande ça :
Ordering: I need to know how you want the mic set up:
A) Low impedance with XLR connector (like a stock SM57 or SM58)
B) High Impedance with Screw-on Connector
C) High impedance with XLR connector "Pin 2 Hot"
D) High impedance with XLR connector "Pin 3 Hot"
All options require a cable that matches that particular configuration:
Low impedance configuration requires a standard low impedance XLR<-->XLR cable. Connect this directly to a PA or wireless transmitter, or connect to a high impedance input like a harp/guitar amp by adding an impedance matching transformer. Note this configuration will not work properly with high impedance XLR cables, i.e., cables with an XLR connector at the mic and and a 1/4” plug at the other. See options C and D above.
High impedance mics are supplied with your choice of standard Switchcraft style 5/8" screw-on connector, or XLR connector. High impedance XLR can be wired "Pin 2 Hot" or "Pin 3 Hot" and must match your cable to work. The Pin 2 Hot configuration is compatible with the Samson AX1 wireless transmitter I offer - no impedance matching transformer is required. Neither of these cables is compatible with low impedance microphones.
If you don't have a cable already, I recommend the screw-on connector (and a cable to go with it if you need one.) This is the shortest, lightest and most secure combination.
Any configuration can be connected to anything - choose what's simplest for you. Here's another way to look at it:
To connect to:
Ultimate Mic Configuration Amp or pedal PA's XLR input PA's 1/4" input AX1 Wireless Transmitter
A: Low Z XLR XLR-XLR cable + Impedance Matching Transformer XLR-XLR cable XLR-XLR cable + Impedance Matching Transformer Yes
B: High Z Screw-on Screw-on cable Screw-on cable + DI Box Screw-on cable Yes, screw-on to XLR adapter required
C: High-Z XLR Pin 2 Hot XLR-1/4" cable,
Pin 2 Hot XLR-1/4" cable, Pin 2 Hot + DI Box XLR-1/4" cable, Pin 2 Hot Yes
D: High-Z XLR Pin 3 Hot XLR-1/4" cable,
Pin 3 Hot XLR-1/4" cable, Pin 3 Hot + DI Box XLR-1/4" cable, Pin 3 Hot Yes, Pin 3 Hot to Pin 2 Hot adapter required
If this is confusing feel free to ask more questions. Once you know what configuration you want, let me know and I will send you a PayPal invoice.
Je sais pas ce que c'est tout ça ! que faut t'il prendre ? je veux pouvoir l'utiliser sur un ampli lampe 5W chez moi et l'utiliser sur scène directement branché à une console.
bon je sais pas si je suis clair !
matlamenace- Messages : 6
Date d'inscription : 23/04/2013
Localisation : 77
Re: Ultimate Series Microphones
Salut.... Au cas où tu attendrais encore une réponse..
A) Low impedance with XLR connector (like a stock SM57 or SM58)
Super pour la console mais nécéssite un adaptateur d'impédance pour rentrer en jack dans ton amp
B) High Impedance with Screw-on Connector
Pour les ampli avec jack à vis...
C) High impedance with XLR connector "Pin 2 Hot"
Idéal pour ton ampli
D) High impedance with XLR connector "Pin 3 Hot"
idem (la phase est inversée... ça ne te sert à rien sauf si tu joues avec plusieurs micros en même temps..
A ta place je prendrais le A ou C
A) Low impedance with XLR connector (like a stock SM57 or SM58)
Super pour la console mais nécéssite un adaptateur d'impédance pour rentrer en jack dans ton amp
B) High Impedance with Screw-on Connector
Pour les ampli avec jack à vis...
C) High impedance with XLR connector "Pin 2 Hot"
Idéal pour ton ampli
D) High impedance with XLR connector "Pin 3 Hot"
idem (la phase est inversée... ça ne te sert à rien sauf si tu joues avec plusieurs micros en même temps..
A ta place je prendrais le A ou C
phenol- Messages : 902
Date d'inscription : 22/11/2009
Localisation : ROUEN
Re: Ultimate Series Microphones
J'ai eu un Ultimate 57. Très bien, pratique en main, mais favorise une légère saturation naturelle. Ca peut être un choix.
Dans le genre "son proche du SM58", sans aucune saturation, et pratique à tenir en main (petit et léger), l'Audix Frieball est super.
Dans le genre "son proche du SM58", sans aucune saturation, et pratique à tenir en main (petit et léger), l'Audix Frieball est super.
--------------------------------------------------------------------------------------------
www.jeromepeyrelevade.com
www.arkia-harmonica.com
www.stageharmonica.com
www.theoverblowers.com
Sujets similaires
» The Ultimate Series
» Les Microphones " bague"
» Braderie de microphones (Astatic, Brush, Shure, ElectroVoice...) et de pédales
» je vend MICROHONE sm 58 Ultimate
» Micros ultimate sm58 et electro-voice re10
» Les Microphones " bague"
» Braderie de microphones (Astatic, Brush, Shure, ElectroVoice...) et de pédales
» je vend MICROHONE sm 58 Ultimate
» Micros ultimate sm58 et electro-voice re10
Page 1 sur 1
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum
|
|